Axe-Fx II Specifications
Specifications subject to change without notice.
FRONT PANEL INPUT
Connector: 1/4” phone jack, unbalanced.
Impedance: 1 MegaOhm (less if Input Impedance is active)
Max. Input Level: +16 dBu (conditioned for guitar use)
REAR INPUTS
Connector: 1/4” phone jack, balanced.
Impedance: 1 MegaOhm
Max. Input Level: +20 dBu
A/D CONVERSION
Bit Depth: 24 bits
Sample Rate: 48 kHz
Dynamic Range: > 110 dB
Frequency Response: 20 – 20kHz, +0 / -1 dB
Crosstalk: < -60 dB over full bandwidth
ANALOG OUTPUTS
Connectors: 1/4” phone jack unbalanced (hum-canceling), XLR balanced (for main output)
Impedance: 600 ohm
Max Output Level: +20 dBu
Dynamic Range: > 110 dB
Frequency Response: 20 – 20kHz, +0 / -1 dB
Crosstalk: < -60 dB over full bandwidth
DIGITAL I/O
Connectors: RCA Coaxial Type for S/PDIF I/O, XLR for AES I/O
Format: S/PDIF – 24 bit
Sample Rate: 48 kHz fixed
USB Audio Clock 48 kHz fixed
MIDI INTERFACE
Input Connector: 7-pin DIN (pins 6 & 7 connected to phantom power in jack)
Out/Thru Connector: 5-pin DIN
PEDAL INTERFACE
Connector: 1/4” TRS phone jack
Format: Switch: Momentary or Latching; Pedal: 10–100kΩ max, linear taper expression type.
MFC INTERFACE:
Connector: RJ-45 Ethernet/EtherCON
IMPORTANT: Do NOT connect the MFC port to a computer or router/switch/hub!
This jack is only intended for connection to an MFC MIDI Foot Controller.
PHANTOM POWER:
Connector: Female 2.5mm jack
WARNING: Do NOT connect adapters with a rating higher than 1A (1000ma)
GENERAL
Finish: Powder coated steel chassis with anodized aluminum faceplate
Display: 160 × 80 dot matrix graphic LCD
Dimensions: 19” × 3.5” × 14.25” (483 × 88 × 362 mm)
Weight: 14.75 lbs (6.7 kg)
Input Voltage: 100–240 VAC, 47 – 63 Hz (universal input)
Power Consumption: <40 W
Backup Battery Life: >10 years
Backup Battery Type: CR2450 Lithium
ENVIRONMENTAL
Operating Temperature: 32 to 122 °F (0 to 50 °C)
Storage Temperature: -22 to 167 °F (-30 to 70 °C)
Humidity: Max. 90% non-condensing
Jacques
Comments